Clarifying Cleansing Clay

Formulation Code
ESG 15056-4/23
Phases

Phase
Ingredients
%W/W

A
Kaolin(Kaolin)
17.00
B1
Glycerin(Glycerin)
33.50
TEGO® Natural Betaine(Betaine)
2.50
TEGO® Cosmo C 100(Creatine)
0.50
Keltrol CG-SFT(Xanthan Gum)
0.50
B2
RHEANCE® One(Glycolipids)
5.00
VARISOFT® EQ 90(Dioleoylethyl Hydroxyethylmonium Methosulfate)
2.00
TEGO® Betain C 60(Cocamidopropyl Betaine)
10.00
Sodium Cocoyl Isethionate, 85%(Sodium Cocoyl Isethionate)
12.50
C
dermofeel® sensolv MB(Isoamyl Laurate)
8.00
TEGOSOFT® LO MB(Lauryl Oleate)
5.00
TEGO® Alkanol 1618 MB(Cetearyl Alcohol)
2.00
Hairflux®(Ceramide NG; Olea Europaea (Olive) Fruit Oil; Ricinus communis (Castor) Seed Oil)
1.00
dermosoft® Octiol(Caprylyl Glycol)
0.50
Processing
1. Disperse Phase B1
2. Add ingredients in Phase B2 into Phase B1 one by one while stirring. Ensure Phase B1/B2 is well-mixed
3. Add Phase C in a separate vessel
4. Heat Phase B1/B2 and Phase C separately to ~75°C
5. Add Phase C into Phase B1/B2 while stirring
6. Slowly Add Kaolin in appropriate partitions, stirring at 800-900 rpm each time using an MFR Stirrer, ensuring it is well mixed.
7. Mix at 1100 – 1200 rpm using an MFR stirrer for ~1 minute.
8. Cool with gentle stirring
Viscosity:
174500 mPas (Brookfield DV-II, sp. 95, 10 rpm)
Stability test:
Proven
Microbiological safety:
Low risk formulation - no challenge test needed
Formulation PDF
Disclaimer
This formulation proposal and all further technical advice are based on our present knowledge and experience. However, it implies no liability or other legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied, or guarantee regarding the formulation proposal in the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and testing of the formulation proposal in the respective application field. Performance and properties of the formulation proposal described herein should be verified by testing, which should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply that similar products could not be used.